Concept v3 for internal review. All engine data is synthetic.

Book a working session

November 2026: preparing to go home. 74 days to redelivery.

TRES. Engine technical records for lessors and operators.

TRES carries the records. Your experts make the call.

Less time managing documents. More time managing the asset.

An engine's history is spread across thousands of pages and several organisations. TRES brings it together and shows what has changed, so the people who know engines can decide what it means.

Drag to turn the engine.

Accept

Get the details out. Check them once.

An engine arrives with 1,284 pages of records. TRES reads them and pulls out part numbers, serial numbers, hours and cycles, so nobody types them in again.

0of 1,284 pages read
Your call The fan disk's cycle count was written by hand. It reads as 8,312, at 61% confidence.

Maintain

See what has changed. Decide what it means.

The engine went on lease in April 2021. Smart Comparison lays today's configuration over that one and brings the differences forward in about 30 seconds.

EEC: different serial numberRemoval record found, 2023. Explained.
LPT stage 5 disk: dash number differsForm 1 says -03, shop visit report says -05. For your specialist.

About four hours saved per lease return.

Transfer

Get the records ready. Find the one that does not hold.

TRES lines up each life-limited part's records across every engine it has been fitted to. You're the specialist: select a part to check its history.

    No part selected yet.

    Transfer

    Share with the right people. Keep the handover moving.

    Access controls decide who sees what. The request for the missing records goes to the operator that flew the disk, with the evidence attached.

    Blocks redelivery
    Part
    HPT stage 2 disk, SN SYN-HD2-04471
    Missing
    Utilisation records, ESN SYN-25588, June 2016 to March 2018
    To
    Ostra Airlines records team (synthetic)
    Reply by
    21 days; records are due with the lessor in 44

    Draft: raise it from the Transfer step, or send it now.

      After you send: agents on each side exchange the records. Concept.

      Where TRES is going Concept

      Ask the engine. It answers from its records.

      Connecting to the engine's agent...

      Where TRES is going Concept

      Your fleet, speaking up before you ask.

      Sixteen engines orbit you. The closer one sits, the sooner it has to move. When an engine notices something, it tells you, shows the evidence and waits for your call. Sometimes they talk to each other first.

      Yourecords specialist

      Listening to the fleet...

        What it's worth on your fleet

        Put in your numbers. See the capacity you get back.

        Every starting figure is an example. Replace them with your own; nothing here is a TRES price or a promise.

        For scale: Smart Comparison alone is about 4 hours per lease return.

        Estimated value a year

        $0
        Delay avoidedSpecialist time released
        Specialist hours released
        0
        That is roughly
        0 people's time
        Value of that time
        $0
        Delay cost avoided
        $0
        Return on the quoted price
        Add a price

        Capacity, not headcount: the same team spends the released time on gaps, compliance evidence and transition readiness.

        Built from experience

        Put to work for your team.

        Developed around RRPF's own engine-leasing activities, TRES brings first-hand understanding of configurations, maintenance records and handovers.

        4 hours

        saved per lease return with Smart Comparison.*

        ~200

        airlines already exchange engine records through TRES.

        "Significant advances in engine redelivery speed and efficiency."

        Qatar Airways

        *Figure from RRPF's Smart Comparison material. Every figure on this page needs RRPF's sign-off before external use.

        What changes for you

        The platform carries the complexity. Your people apply the judgement.

        Inside TRES

        Smart Comparison, line by line.

        Twelve positions on SYN-27041, delivered against returning. Matches clear themselves; anything that needs judgement waits for your specialist.

        Configuration comparison, SYN-27041 0:00
        Delivered and returning configuration for SYN-27041
        PositionDelivered April 2021ReturningResult
        12 positions

        Illustrative interface built for this concept. The real product screens would replace it.

        Focus the review

        Instead of checking every line the same way, your team sees the two lines that need a decision.

        Apply your judgement

        A swapped part with a removal record is explained. A part whose records disagree goes to your specialist.

        For records managers

        Manage risk and readiness, not spreadsheets.

        Sixteen synthetic engines, sorted by how soon each has to move. Select one to see what is outstanding.

        Each engine's agent can report in. Concept.
        Synthetic engine portfolio. Select a row for its open items.
        EngineOperator (synthetic)Next event Open items
        Return minimum, 5,000 FC Forecasts cover Trent 700 and V2500 only. CFM56-5B: partial coverage.

        For airlines

        Keep AMOS. Keep SAP. Add the engine records layer.

        Your maintenance system stays the system of record. TRES sits beside it and handles the records work between you, your lessors and your MROs.

        Your maintenance system sends records packs to TRES by upload today; direct integration is on the roadmap. TRES shares records and open items with lessors, operators and MROs under access controls. Your M&E system AMOS, SAP or TRAX System of record TRES Records, changes, open items Upload Direct link (roadmap) Lessor Operator MRO Shared under access controls
        Engine coverage today
        Engine familyWhat is coveredStatus

        On the roadmap

        What comes next.

        Not in the product today. Shown so you can plan with us.

        Smart Compliance

        AD and SB status read against the records, with anything unproven sent to a person.

        Proof of concept

        Direct M&E integration

        Records and configuration exchanged with AMOS, SAP or TRAX without uploads.

        Under review

        More engine types

        Configuration preloaded for more CFM, LEAP, Pratt & Whitney and GE types.

        Type by type

        Let's put your records to the test.

        Bring one engine with a return or transition coming up. We load its records before we meet, and your team works through them in TRES.

        1. You choose the engine and share its records pack.
        2. We load it and run the checks you have just seen.
        3. Your specialists work through what needs a decision, with us.

        Onboarding takes about four months.

        Session requested. This is a concept page, so nothing has been sent.